|
Which control signal on a serial cable, indicates that the data set is ready?
(this question provided by simulationexams.com)
| ( | A | ) | | DTR |
 |
| ( | B | ) | | DSR |
|
| ( | C | ) | | RTS |
|
| ( | D | ) | | CTS |
|
| ( | E | ) | | None of the above |
The Correct Answer is: B
The most chosen answer was [ D ] :: [ CTS ]
Explanation:
COM1, COM2 on a computer uses a serial cable. The pin
assignments are shown below. The computer acts as a DTE (Data Terminal Equipment)
and the Modem acts as DCE (Data Communication Equipment).
Signal--Name---------DB9 Pin
RX------Received Data--2
TX------Transmitted Data-3
DTR-----Data Terminal Ready--4
GND---- Ground--5
DSR---- Data Set Ready--6
RTS---- Request to Send--7
CTS---- Clear to send--8
Normally, a DTE device connects to a DCE device
with a straight cable. If you want to connect two DTR devices, as you would do
to hook up two computers via the serial line to exchange files, the cable itself
must have cross connections. Such a cable is called a null modem cable.
By default, which of the following networking technology configurations does Windows 95 support?
| ( | A | ) | | Client Server |
|
| ( | B | ) | | Frame Relay |
|
| ( | C | ) | | ATM |
|
| ( | D | ) | | Peer to Peer |
|
| ( | E | ) | | Packet Switched |
The Correct Answer is: D
Explanation:
Windows 95 is defaulted to support the use of a Peer to Peer network configuration.
How would you manually setup a local printer on a Windows PC?
| ( | A | ) | | Start -> Run... -> Printer /setup |
|
| ( | B | ) | | In Control Panel, choose Local Printer |
|
| ( | C | ) | | Under Accessories, select Printers |
|
| ( | D | ) | | In the Printer folder double-click Add Printer and choose My Computer |
|
| ( | E | ) | | In the Printer folder double-click Add Printer and choose Network Printer Server |
The Correct Answer is: D
Explanation:
To install a local printer onto a PC, go through the Start button, -> Settings and choose Printers. From there double click on Add Printer and select My Computer to locally install the printer.
How would you manually setup a local printer on a Windows PC?
| ( | A | ) | | Start -> Run... -> Printer /setup |
|
| ( | B | ) | | In Control Panel, choose Local Printer |
|
| ( | C | ) | | Under Accessories, select Printers |
|
| ( | D | ) | | In the Printer folder double-click Add Printer and choose My Computer |
|
| ( | E | ) | | In the Printer folder double-click Add Printer and choose Network Printer Server |
The Correct Answer is: D
Explanation:
To install a local printer onto a PC, go through the Start button, -> Settings and choose Printers. From there double click on Add Printer and select My Computer to locally install the printer.
When a continuous beep sound comes from the PC when trying to boot there is a problem with which piece of hardware?
| ( | A | ) | | BIOS code is corrupted |
|
| ( | B | ) | | Speaker unplugged |
|
| ( | C | ) | | Mouse not plugged in |
|
| ( | D | ) | | Hard disk crash |
|
| ( | E | ) | | Power supply |
The Correct Answer is: E
Explanation:
When there is a problem with the power supply, a long beep sound will be used to alert the user.
This quiz was generated by user marion burton in april2002.
a+ certification || gmat test prep || pool game || funny joke
|
