|
COM 3 uses which of the following I/O addresses?
| ( | A | ) | | 2e8 |
 |
| ( | B | ) | | 2f8 |
 |
| ( | C | ) | | 2f7 |
 |
| ( | D | ) | | 3e8 |
 |
| ( | E | ) | | 3f7 |
The Correct Answer is: D
The most chosen answer was [ C ] :: [ 2f7 ]
Explanation:
COM 3 is assigned the the I/O address 3e8.
When a continuous beep sound comes from the PC when trying to boot there is a problem with which piece of hardware?
| ( | A | ) | | BIOS code is corrupted |
 |
| ( | B | ) | | Speaker unplugged |
 |
| ( | C | ) | | Mouse not plugged in |
 |
| ( | D | ) | | Hard disk crash |
 |
| ( | E | ) | | Power supply |
The Correct Answer is: E
Explanation:
When there is a problem with the power supply, a long beep sound will be used to alert the user.
Which DOS FORMAT command is used to create a self-booting diskette?
| ( | A | ) | | FORMAT /B |
 |
| ( | B | ) | | FORMAT /S |
 |
| ( | C | ) | | FORMAT /A /E |
 |
| ( | D | ) | | FORMAT /BOOT |
 |
| ( | E | ) | | FORMAT /OS |
The Correct Answer is: B
Explanation:
/S (System) is the attribute that should be used with the FORMAT command to create a self-booting diskette.
The files
- IO.SYS
- MSDOS.SYS
- COMMAND.COM
are copied onto the diskette.
Terminology
What does the following acronym stand for:
VPN
| ( | A | ) | | Virtual Private Network |
 |
| ( | B | ) | | Voice Packet Network |
 |
| ( | C | ) | | Voice Phone Normalization |
 |
| ( | D | ) | | Very Powerful Network |
 |
| ( | E | ) | | Voice Parallel Notification |
The Correct Answer is: A
Explanation:
VPN stands for Virtual Private Network. A VPN is used to connect a node to a network by using public wires. Many remote workers connect to their offices through the use of VPNs.
Which control signal on a serial cable, indicates that the data set is ready?
(this question provided by simulationexams.com)
| ( | A | ) | | DTR |
 |
| ( | B | ) | | DSR |
 |
| ( | C | ) | | RTS |
 |
| ( | D | ) | | CTS |
 |
| ( | E | ) | | None of the above |
The Correct Answer is: B
Explanation:
COM1, COM2 on a computer uses a serial cable. The pin
assignments are shown below. The computer acts as a DTE (Data Terminal Equipment)
and the Modem acts as DCE (Data Communication Equipment).
Signal--Name---------DB9 Pin
RX------Received Data--2
TX------Transmitted Data-3
DTR-----Data Terminal Ready--4
GND---- Ground--5
DSR---- Data Set Ready--6
RTS---- Request to Send--7
CTS---- Clear to send--8
Normally, a DTE device connects to a DCE device
with a straight cable. If you want to connect two DTR devices, as you would do
to hook up two computers via the serial line to exchange files, the cable itself
must have cross connections. Such a cable is called a null modem cable.
This quiz was generated by user pfarokh in april2002.
a+ certification || gmat test prep || pool game || funny joke
|