|
You have loaded Windows 3.1 into the primary partition on your computer, and made it the default Operating System. You have formatted one of the logical drives in the Extended partition. Which file system would have been installed?
(this question provided by simulationexams.com)
| ( | A | ) | | FAT16 |
 |
| ( | B | ) | | FAT32 |
|
| ( | C | ) | | VFAT |
|
| ( | D | ) | | NTFS |
|
| ( | E | ) | | None of the above |
The Correct Answer is: A
The most chosen answer was [ D ] :: [ NTFS ]
Explanation:
-
DOS natively supports only FAT16.
-
Since Windows 3.1 runs on top of DOS, it will also support only FAT16
file system.
-
FAT32 is supported by Windows 98 and Windows 95 OEM Release 2.
-
Note that Windows NT does not support FAT32. NT supports only FAT16 and
NTFS.
Windows 2000 supports FAT16, FAT32, and NTFS
What 3 things must be configured in the Operating System in order to use an internal modem?
| ( | A | ) | | COM, I/O, IRQ |
|
| ( | B | ) | | DMA Channel, IRQ, I/O |
|
| ( | C | ) | | IRQ, I/O |
|
| ( | D | ) | | DMA Channel, I/O |
|
| ( | E | ) | | COM, DMA Channel, IRQ |
The Correct Answer is: A
Explanation:
The 3 things that must be configured for an internal modem to work are the COM port, I/O address, and IRQ (Interupt Request).
Which of the following files is NOT required for DOS to boot?
(this question provided by simulationexams.com)
| ( | A | ) | | COMMAND.COM |
|
| ( | B | ) | | MSDOS.SYS |
|
| ( | C | ) | | IO.SYS |
|
| ( | D | ) | | AUTOEXEC.BAT |
|
| ( | E | ) | | None of the above are required |
The Correct Answer is: D
Explanation:
The
file load order to start DOS is :
IO.SYS
MSDOS.SYS
CONFIG.SYS
COMMAND.COM
AUTOEXEC.BAT
Note
that CONFIG.SYS, and AUTOEXEC.BAT are optional to load DOS where as IO.SYS,
MSDOS.SYS, COMMAND.COM are required.
Which of the following storage components / media will give the fastest data access time?
| ( | A | ) | | RAM |
|
| ( | B | ) | | Serial Port |
|
| ( | C | ) | | Zip Disk |
|
| ( | D | ) | | Hard Disk |
|
| ( | E | ) | | DVD |
The Correct Answer is: A
Explanation:
Data that is stored in RAM, which stands for Random Access Memory, can be access quicker than any of the other choices.
RAM loses its contents when power is turned off.
Which of the following printer technologies doesn't relate to the type of printer?
| ( | A | ) | | Laser |
|
| ( | B | ) | | Dye Sublimation |
|
| ( | C | ) | | Split-Ink |
|
| ( | D | ) | | Thermal |
|
| ( | E | ) | | Dot Matrix |
The Correct Answer is: C
Explanation:
Split Ink technology is used to print security patterns across a document, usually with differing colors.
Laser, Dye Sublimation, Thermal & Dot Matrix all refer to types of printers.
This quiz was generated by user wiwin in april2002.
a+ certification || gmat test prep || pool game || funny joke
|
