|
Recognizing components:
| ( | A | ) | | Printer Port |
 |
| ( | B | ) | | Internal Modem |
|
| ( | C | ) | | Video Card |
|
| ( | D | ) | | Processor |
|
| ( | E | ) | | Motherboard |
The Correct Answer is: E
The most chosen answer was [ D ] :: [ Processor ]
Explanation:
The picture is of a Motherboard. It is actually an Intel Socket 478 Motherboard with support for a P4 Socket 478 mPGA Processor.
What 3 things must be configured in the Operating System in order to use an internal modem?
| ( | A | ) | | COM, I/O, IRQ |
|
| ( | B | ) | | DMA Channel, IRQ, I/O |
|
| ( | C | ) | | IRQ, I/O |
|
| ( | D | ) | | DMA Channel, I/O |
|
| ( | E | ) | | COM, DMA Channel, IRQ |
The Correct Answer is: A
Explanation:
The 3 things that must be configured for an internal modem to work are the COM port, I/O address, and IRQ (Interupt Request).
You are reported that the monitor at a client's place is having a problem. You are about to remove the cover of the monitor. What do you do just before opening the monitor cover? Choose all that apply.
(this question provided by simulationexams.com)
| ( | A | ) | | Wear wrist strap to prevent ESD damage to the monitor |
|
| ( | B | ) | | Make sure that the power is switched off and the power cord is plugged out |
|
| ( | C | ) | | Make sure that the ESD is grounded properly |
|
| ( | D | ) | | Connect the Monitor as well as the wrist strap to the ground. |
|
| ( | E | ) | | All of the above |
The Correct Answer is: B
Explanation:
Never wear a wrist strap when working on monitors.
Monitors contain very high voltages, sometimes fatal to human, even when the
power is turned off. If you are wearing wrist strap, the human body work as a
conduit to discharge the electric charge.
What tool would be used to check for line voltage sags?
| ( | A | ) | | Surge protector |
|
| ( | B | ) | | Feedback circuit |
|
| ( | C | ) | | Terminal adapter |
|
| ( | D | ) | | Polarity tester |
|
| ( | E | ) | | High frequency monitor |
The Correct Answer is: D
Explanation:
A Polarity tester is useful whenever there is a need to check for the presence of low voltage in insulated conductors, without having to touch the live cable or wire.
Which of the following printer technologies doesn't relate to the type of printer?
| ( | A | ) | | Laser |
|
| ( | B | ) | | Dye Sublimation |
|
| ( | C | ) | | Split-Ink |
|
| ( | D | ) | | Thermal |
|
| ( | E | ) | | Dot Matrix |
The Correct Answer is: C
Explanation:
Split Ink technology is used to print security patterns across a document, usually with differing colors.
Laser, Dye Sublimation, Thermal & Dot Matrix all refer to types of printers.
This quiz was generated by user GIZBEK in august2002.
a+ certification || gmat test prep || pool game || funny joke
|
