|
A Serial Port on the back of a PC would most likely be used to connect to which external device?
| ( | A | ) | | Monitor |
 |
| ( | B | ) | | Scanner |
|
| ( | C | ) | | SCSI Card |
|
| ( | D | ) | | Printer |
|
| ( | E | ) | | Modem |
The Correct Answer is: E
The most chosen answer was [ A ] :: [ Monitor ]
Explanation:
External Modems are connected to a serial port. DSL and Cable Modems which aren't really 'modems' would be connected to an RJ45 port on a NIC.
Which of the following is the port address for serial port COM1?
(this question provided by simulationexams.com)
| ( | A | ) | | 3F0-3F7 |
|
| ( | B | ) | | 2F8-2FF |
|
| ( | C | ) | | 320-32F |
|
| ( | D | ) | | 3F8-3FF |
|
| ( | E | ) | | None of the above |
The Correct Answer is: D
Explanation:
You need to memorize the following port addresses
before attending the exam.
Port-Base
address (in hex)
COM4:
2E8-2EF
COM2:
2F8-2FF
COM3:
3E8-3EF
COM1:
3F8-3FF
LPT2 :
278-27F
LPT1 :
378-37F
Floppy Controller:
3F0-3F7
Hard Drive Controller, 16
bit, ISA: 1F0-1F8
On an Ethernet 10BaseT network what is the maximum data speed that can be carried through a CAT 5 cable?
| ( | A | ) | | 100 megabits/second |
|
| ( | B | ) | | 80 megabits/second |
|
| ( | C | ) | | 20 megabits/second |
|
| ( | D | ) | | 16 megabits/second |
|
| ( | E | ) | | 4 megabits/second |
The Correct Answer is: A
Explanation:
CAT 5 cable can carry data at a maximum speed of 100 megabits/second.
CAT 4: 20 megabits/second
CAT 3: 16 megabits/second
CAT 2: 4 megabits/second
CAT 1 wire is used with standard telephone lines inside a home.
By default, which of the following networking technology configurations does Windows 95 support?
| ( | A | ) | | Client Server |
|
| ( | B | ) | | Frame Relay |
|
| ( | C | ) | | ATM |
|
| ( | D | ) | | Peer to Peer |
|
| ( | E | ) | | Packet Switched |
The Correct Answer is: D
Explanation:
Windows 95 is defaulted to support the use of a Peer to Peer network configuration.
How many devices, a 16 bit SCSI-2 can support?
(this question provided by simulationexams.com)
| ( | A | ) | | 8 |
|
| ( | B | ) | | 16 |
|
| ( | C | ) | | 7 |
|
| ( | D | ) | | 14 |
|
| ( | E | ) | | None of the above |
The Correct Answer is: B
Explanation:
For a 16-bit Wide SCSI, there are 16 possible
SCSI Ids, 0-15. A standard 8-bit SCSI can support only 8 devices (including SCSI
card), the Ids allows are 0-7.
SCSI ID - 0=bootable drive, 7=controller, 1-6=any
other devices
SCSI 3 ultra-wide - 16 devices, 0=bootable drive, 15=controller
This quiz was generated by user guest69936 in august2002.
a+ certification || gmat test prep || pool game || funny joke
|
