|
A U.S. wall outlet should be distributing how many volts to the Power Supply?
| ( | A | ) | | 110 Volts DC |
 |
| ( | B | ) | | 200-240 Volts DC |
|
| ( | C | ) | | 104-130 Volts DC |
|
| ( | D | ) | | 200-240 Volts AC |
|
| ( | E | ) | | 104-130 Volts AC |
The Correct Answer is: E
The most chosen answer was [ A ] :: [ 110 Volts DC ]
Explanation:
A properly functioning wall outlet will give off between 104-130 Volts of AC power.
How many devices, a 16 bit SCSI-2 can support?
(this question provided by simulationexams.com)
| ( | A | ) | | 8 |
|
| ( | B | ) | | 16 |
|
| ( | C | ) | | 7 |
|
| ( | D | ) | | 14 |
|
| ( | E | ) | | None of the above |
The Correct Answer is: B
Explanation:
For a 16-bit Wide SCSI, there are 16 possible
SCSI Ids, 0-15. A standard 8-bit SCSI can support only 8 devices (including SCSI
card), the Ids allows are 0-7.
SCSI ID - 0=bootable drive, 7=controller, 1-6=any
other devices
SCSI 3 ultra-wide - 16 devices, 0=bootable drive, 15=controller
The first physical sector in any bootable hard disk contains which of the following?
(this question provided by simulationexams.com)
| ( | A | ) | | File structure |
|
| ( | B | ) | | Data structure |
|
| ( | C | ) | | MBR |
|
| ( | D | ) | | LBR |
|
| ( | E | ) | | None of the above |
The Correct Answer is: C
Explanation:
The first physical
sector on any bootable hard disk contains Master Boot Record, MBR.
What is the storage capacity of a 3 1/2" Double Sided High Density (DSHD) Floppy disk?
(this question provided by simulationexams.com)
| ( | A | ) | | 1.2 MB |
|
| ( | B | ) | | 1.44 MB |
|
| ( | C | ) | | 720 KB |
|
| ( | D | ) | | 1.4 MB |
|
| ( | E | ) | | None of the above |
The Correct Answer is: B
Explanation:
The storage capacity of various types of floppy disks that you need to know as part of A+ certification is given below:
Size------Type----Storage
5 1/4" ---DSDD----360KB
5 1/4" ---DSHD----1.2MB
3 1/2" ---DSDD----720KB
3 1/2" ---DSHD----1.44MB
3 1/2" ---DSED----2.88MB
DSDD: Double Sided Double Density
DSHD: Double Sided High Density
DSED: Double Sided Extra Density
How should the jumpers be set on an IDE CD-ROM drive that is attached to the primary IDE adapter with a hard drive?
| ( | A | ) | | All Jumpers |
|
| ( | B | ) | | No Jumpers |
|
| ( | C | ) | | Master |
|
| ( | D | ) | | Cable select |
|
| ( | E | ) | | Slave |
The Correct Answer is: E
Explanation:
The IDE Hard drive should be set as the master and the CD-ROM drive as the slave.
This quiz was generated by user mitra in august2002.
a+ certification || gmat test prep || pool game || funny joke
|
