|
Which DOS FORMAT command is used to create a self-booting diskette?
| ( | A | ) | | FORMAT /B |
 |
| ( | B | ) | | FORMAT /S |
|
| ( | C | ) | | FORMAT /A /E |
|
| ( | D | ) | | FORMAT /BOOT |
|
| ( | E | ) | | FORMAT /OS |
The Correct Answer is: B
The most chosen answer was [ B ] :: [ FORMAT /S ]
Explanation:
/S (System) is the attribute that should be used with the FORMAT command to create a self-booting diskette.
The files
- IO.SYS
- MSDOS.SYS
- COMMAND.COM
are copied onto the diskette.
What tool would be used to check for line voltage sags?
| ( | A | ) | | Surge protector |
|
| ( | B | ) | | Feedback circuit |
|
| ( | C | ) | | Terminal adapter |
|
| ( | D | ) | | Polarity tester |
|
| ( | E | ) | | High frequency monitor |
The Correct Answer is: D
Explanation:
A Polarity tester is useful whenever there is a need to check for the presence of low voltage in insulated conductors, without having to touch the live cable or wire.
When Windows 95/98 boots successfully, it creates two back up files for the Registry. Which are those two back up Registry files?
(this question provided by simulationexams.com)
| ( | A | ) | | REG0.DAT, REG1.DAT |
|
| ( | B | ) | | USER.DAT, SYSTEM.DAT |
|
| ( | C | ) | | USER.DA0, SYSTEM.DA0 |
|
| ( | D | ) | | REG_BACK.DAT, REG_SYS.DAT |
|
| ( | E | ) | | None of the above |
The Correct Answer is: C
Explanation:
Windows 95 makes a backup of the Registry after every successful reboot. The Registry back up files are named: USER.DA0, SYSTEM.DA0. The original Registry files are named: USER.DAT, SYSTEM.DAT. It may be noted, that in the event of boot failure, you can delete the original USER.DAT AND SYSTEM.DAT files and the back up files can be renamed to DAT files and the system can be rebooted successfully.
A 25-pin, female D-shell connector which can be found on the back of a computer is what type of port?
| ( | A | ) | | Parallel |
|
| ( | B | ) | | Serial |
|
| ( | C | ) | | Game |
|
| ( | D | ) | | Monitor |
|
| ( | E | ) | | SCSI |
The Correct Answer is: A
Explanation:
The parallel port uses a 25-pin female connector coming out of the back of a PC.
Which function key is pressed to bypass CONFIG.SYS, and AUTOEXEC.BAT during the DOS boot process?
(this question provided by simulationexams.com)
| ( | A | ) | | F6 |
|
| ( | B | ) | | F8 |
|
| ( | C | ) | | F4 |
|
| ( | D | ) | | F5 |
|
| ( | E | ) | | None of the above |
The Correct Answer is: D
Explanation:
To bypass the CONFIG.SYS, and AUTOEXEC.BAT files during boot process of DOS, you need to press F5. F8 allows you to selectively bypass commands in AUTOEXEC.BAT, and CONFIG.SYS.
This quiz was generated by user mukesh663 in august2002.
a+ certification || gmat test prep || pool game || funny joke
|
