|
While installing an expansion board into a PC you are faced with a device conflict error. From the choices below, which is NOT likely to be related to the conflict.
| ( | A | ) | | DMA Channels |
 |
| ( | B | ) | | RAM Addresses |
|
| ( | C | ) | | I/O Addresses |
|
| ( | D | ) | | ROM Addresses |
|
| ( | E | ) | | None are related to the conflict |
The Correct Answer is: B
The most chosen answer was [ B ] :: [ RAM Addresses ]
Explanation:
RAM Addressing is not likely to be the cause of the conflict. You should check the other Channel and Address allocations to make sure that there are no conflicts.
How many pins a DIN-5 connector will have?
(this question provided by simulationexams.com)
| ( | A | ) | | 3 |
|
| ( | B | ) | | 4 |
|
| ( | C | ) | | 5 |
|
| ( | D | ) | | 9 |
|
| ( | E | ) | | None of the above |
The Correct Answer is: C
Explanation:
Usually, Keyboards come with two types of
connectors. They are:
1.
DIN-5
2.
Mini DIN-6
DIN-5 are used with AT style keyboards. DIN-5 has 5
pins. Mini DIN-6, also known as PS/2 connector has around port with 6 pins, one
of which being a square pin used for alignment.
Printers can be connected to a PC in many different ways. Which of the following interfaces IS NOT a common method for a PC to be connected to a printer?
| ( | A | ) | | USB |
|
| ( | B | ) | | Parallel |
|
| ( | C | ) | | SCSI |
|
| ( | D | ) | | Analog LCD |
|
| ( | E | ) | | Network |
The Correct Answer is: D
Explanation:
An Analog LCD interface is used for LCD monitors. The others are all valid methods for connecting a PC to a printer.
What is the connector type that goes with a CGA / EGA monitor?
(this question provided by simulationexams.com)
| ( | A | ) | | DB-25 |
|
| ( | B | ) | | DB-15 |
|
| ( | C | ) | | DB-9 |
|
| ( | D | ) | | DB-5 |
|
| ( | E | ) | | None of the above |
The Correct Answer is: C
Explanation:
If you are using a Monochrome / CGA/ EGA monitor, it is a digital monitor and will have a DB-9 Male connector that plugs into a digital adapter. If you are using a VGA/ SVGA monitor, it will have a male DB-15 connector that plugs into an analog adapter. You should never interchange an analog monitor to that of a digital adapter and vice versa, or severe damage may take place.
How may devices can be added to a typical SCSI adapter?
| ( | A | ) | | 8 |
|
| ( | B | ) | | 7 |
|
| ( | C | ) | | 6 |
|
| ( | D | ) | | 5 |
|
| ( | E | ) | | Infinite |
The Correct Answer is: B
Explanation:
A typical SCSI adapter can support up to 7 devices. Including the adapter would be 8 devices, but since the question asks for how many can be 'added to,' then the adapter shouldn't be included in the calculation.
This quiz was generated by user deevonj in dec2002.
a+ certification || gmat test prep || pool game || funny joke
|
