|
Which of the following commands does a modem send before transferring data over a line?
| ( | A | ) | | TRANS |
 |
| ( | B | ) | | ATDT |
|
| ( | C | ) | | ADT |
|
| ( | D | ) | | RTDT |
|
| ( | E | ) | | RTS |
The Correct Answer is: E
The most chosen answer was [ C ] :: [ ADT ]
Explanation:
A modem first sends out an RTS or Request To Send signal before transferring data.
Which tool can you use to find out what type of NIC (Network Interface Card) is installed on a Windows 95/98 system?
| ( | A | ) | | Device Manager |
|
| ( | B | ) | | Network Manager |
|
| ( | C | ) | | NIC.exe |
|
| ( | D | ) | | File Manager |
|
| ( | E | ) | | Internet Explorer |
The Correct Answer is: A
Explanation:
The Device Manager will give you a listing of the components installed in the system. You can use this to find out what type of NIC is installed.
How many devices, a 16 bit SCSI-2 can support?
(this question provided by simulationexams.com)
| ( | A | ) | | 8 |
|
| ( | B | ) | | 16 |
|
| ( | C | ) | | 7 |
|
| ( | D | ) | | 14 |
|
| ( | E | ) | | None of the above |
The Correct Answer is: B
Explanation:
For a 16-bit Wide SCSI, there are 16 possible
SCSI Ids, 0-15. A standard 8-bit SCSI can support only 8 devices (including SCSI
card), the Ids allows are 0-7.
SCSI ID - 0=bootable drive, 7=controller, 1-6=any
other devices
SCSI 3 ultra-wide - 16 devices, 0=bootable drive, 15=controller
How should the jumpers be set on an IDE CD-ROM drive that is attached to the primary IDE adapter with a hard drive?
| ( | A | ) | | All Jumpers |
|
| ( | B | ) | | No Jumpers |
|
| ( | C | ) | | Master |
|
| ( | D | ) | | Cable select |
|
| ( | E | ) | | Slave |
The Correct Answer is: E
Explanation:
The IDE Hard drive should be set as the master and the CD-ROM drive as the slave.
Which DOS FORMAT command is used to create a self-booting diskette?
| ( | A | ) | | FORMAT /B |
|
| ( | B | ) | | FORMAT /S |
|
| ( | C | ) | | FORMAT /A /E |
|
| ( | D | ) | | FORMAT /BOOT |
|
| ( | E | ) | | FORMAT /OS |
The Correct Answer is: B
Explanation:
/S (System) is the attribute that should be used with the FORMAT command to create a self-booting diskette.
The files
- IO.SYS
- MSDOS.SYS
- COMMAND.COM
are copied onto the diskette.
This quiz was generated by user jhandeland in dec2002.
a+ certification || gmat test prep || pool game || funny joke
|
