|
How many pins a DIN-5 connector will have?
(this question provided by simulationexams.com)
| ( | A | ) | | 3 |
 |
| ( | B | ) | | 4 |
|
| ( | C | ) | | 5 |
|
| ( | D | ) | | 9 |
|
| ( | E | ) | | None of the above |
The Correct Answer is: C
The most chosen answer was [ D ] :: [ 9 ]
Explanation:
Usually, Keyboards come with two types of
connectors. They are:
1.
DIN-5
2.
Mini DIN-6
DIN-5 are used with AT style keyboards. DIN-5 has 5
pins. Mini DIN-6, also known as PS/2 connector has around port with 6 pins, one
of which being a square pin used for alignment.
Which protocol is used by the Internet?
| ( | A | ) | | IPX/SPX |
|
| ( | B | ) | | NetBIOS |
|
| ( | C | ) | | Data Link |
|
| ( | D | ) | | TCP/IP |
|
| ( | E | ) | | Microsoft Talk |
The Correct Answer is: D
Explanation:
The TCP/IP protocol is used to connect networks on the Internet.
Which of the following files is NOT required for DOS to boot?
(this question provided by simulationexams.com)
| ( | A | ) | | COMMAND.COM |
|
| ( | B | ) | | MSDOS.SYS |
|
| ( | C | ) | | IO.SYS |
|
| ( | D | ) | | AUTOEXEC.BAT |
|
| ( | E | ) | | None of the above are required |
The Correct Answer is: D
Explanation:
The
file load order to start DOS is :
IO.SYS
MSDOS.SYS
CONFIG.SYS
COMMAND.COM
AUTOEXEC.BAT
Note
that CONFIG.SYS, and AUTOEXEC.BAT are optional to load DOS where as IO.SYS,
MSDOS.SYS, COMMAND.COM are required.
What is the storage capacity of a 3 1/2" Double Sided High Density (DSHD) Floppy disk?
(this question provided by simulationexams.com)
| ( | A | ) | | 1.2 MB |
|
| ( | B | ) | | 1.44 MB |
|
| ( | C | ) | | 720 KB |
|
| ( | D | ) | | 1.4 MB |
|
| ( | E | ) | | None of the above |
The Correct Answer is: B
Explanation:
The storage capacity of various types of floppy disks that you need to know as part of A+ certification is given below:
Size------Type----Storage
5 1/4" ---DSDD----360KB
5 1/4" ---DSHD----1.2MB
3 1/2" ---DSDD----720KB
3 1/2" ---DSHD----1.44MB
3 1/2" ---DSED----2.88MB
DSDD: Double Sided Double Density
DSHD: Double Sided High Density
DSED: Double Sided Extra Density
What 3 things must be configured in the Operating System in order to use an internal modem?
| ( | A | ) | | COM, I/O, IRQ |
|
| ( | B | ) | | DMA Channel, IRQ, I/O |
|
| ( | C | ) | | IRQ, I/O |
|
| ( | D | ) | | DMA Channel, I/O |
|
| ( | E | ) | | COM, DMA Channel, IRQ |
The Correct Answer is: A
Explanation:
The 3 things that must be configured for an internal modem to work are the COM port, I/O address, and IRQ (Interupt Request).
This quiz was generated by user guest540011 in jan2002.
a+ certification || gmat test prep || pool game || funny joke
|
