|
How should the jumpers be set on an IDE CD-ROM drive that is attached to the primary IDE adapter with a hard drive?
| ( | A | ) | | All Jumpers |
 |
| ( | B | ) | | No Jumpers |
|
| ( | C | ) | | Master |
|
| ( | D | ) | | Cable select |
|
| ( | E | ) | | Slave |
The Correct Answer is: E
The most chosen answer was [ A ] :: [ All Jumpers ]
Explanation:
The IDE Hard drive should be set as the master and the CD-ROM drive as the slave.
There are many different connector types that are used on network cables. Which of the following is a common Network Cable Connector?
| ( | A | ) | | BNC |
|
| ( | B | ) | | RJ-45 |
|
| ( | C | ) | | AUI |
|
| ( | D | ) | | ST / SC |
|
| ( | E | ) | | All of the above are connectors |
The Correct Answer is: E
Explanation:
They are all common network cable connectors.
BNC: used with coaxial cables
RJ-45: used with 8-wire network cables, most commonly found with Ethernets.
AUI: used with coaxial cables
ST / SC: used with fiber optic cables
When you are able to narrow down a grinding sound from inside the PC as coming from the hard drive, what is the most likely cause of that noise?
| ( | A | ) | | Speaker to close to hard drive |
|
| ( | B | ) | | Vibrations from the cd-rom drive |
|
| ( | C | ) | | Loose ribbon cable |
|
| ( | D | ) | | Excessive dust surrounding the drive |
|
| ( | E | ) | | HDI (Head-to-Disk Interface) |
The Correct Answer is: E
Explanation:
A grinding noise coming from the hard drive is most likely caused by an HDI situation. This occurs when a head becomes misaligned and eventually this will scratch / burn the disk making it inoperable.
Which of the following files is loaded when the PC starts for CD-ROM support?
| ( | A | ) | | LoadCDrom.exe |
|
| ( | B | ) | | CD.com |
|
| ( | C | ) | | WinCD.exe |
|
| ( | D | ) | | MSrom.dll |
|
| ( | E | ) | | MSCDEX.exe |
The Correct Answer is: E
Explanation:
Mscdex.exe is a CD-ROM "redirector." It hooks into the MS-DOS or Windows operating system the same way the network redirector does to obtain access to files that are not on local hard or floppy disks, but on CD-ROM.
A Serial Port on the back of a PC would most likely be used to connect to which external device?
| ( | A | ) | | Monitor |
|
| ( | B | ) | | Scanner |
|
| ( | C | ) | | SCSI Card |
|
| ( | D | ) | | Printer |
|
| ( | E | ) | | Modem |
The Correct Answer is: E
Explanation:
External Modems are connected to a serial port. DSL and Cable Modems which aren't really 'modems' would be connected to an RJ45 port on a NIC.
This quiz was generated by user noordhaka in jan2002.
a+ certification || gmat test prep || pool game || funny joke
|
