|
By default, which of the following networking technology configurations does Windows 95 support?
| ( | A | ) | | Client Server |
 |
| ( | B | ) | | Frame Relay |
|
| ( | C | ) | | ATM |
|
| ( | D | ) | | Peer to Peer |
|
| ( | E | ) | | Packet Switched |
The Correct Answer is: D
The most chosen answer was [ B ] :: [ Frame Relay ]
Explanation:
Windows 95 is defaulted to support the use of a Peer to Peer network configuration.
While installing an expansion board into a PC you are faced with a device conflict error. From the choices below, which is NOT likely to be related to the conflict.
| ( | A | ) | | DMA Channels |
|
| ( | B | ) | | RAM Addresses |
|
| ( | C | ) | | I/O Addresses |
|
| ( | D | ) | | ROM Addresses |
|
| ( | E | ) | | None are related to the conflict |
The Correct Answer is: B
Explanation:
RAM Addressing is not likely to be the cause of the conflict. You should check the other Channel and Address allocations to make sure that there are no conflicts.
The SETUP program during the Boot process allows you to set which of the following?
| ( | A | ) | | Schedule system virus scan |
|
| ( | B | ) | | Windows user accounts |
|
| ( | C | ) | | Network settings |
|
| ( | D | ) | | Details of the drives being used |
|
| ( | E | ) | | Screen resolution |
The Correct Answer is: D
Explanation:
When entering the PCs main SETUP program during the Boot process you will have the option to manually set the details of the drives installed in the PC. All the other options can be set only after the OS has loaded.
When a continuous beep sound comes from the PC when trying to boot there is a problem with which piece of hardware?
| ( | A | ) | | BIOS code is corrupted |
|
| ( | B | ) | | Speaker unplugged |
|
| ( | C | ) | | Mouse not plugged in |
|
| ( | D | ) | | Hard disk crash |
|
| ( | E | ) | | Power supply |
The Correct Answer is: E
Explanation:
When there is a problem with the power supply, a long beep sound will be used to alert the user.
IRQ2 is used with which of the following?
(this question provided by simulationexams.com)
| ( | A | ) | | COM1 |
|
| ( | B | ) | | COM2 |
|
| ( | C | ) | | LPT1 |
|
| ( | D | ) | | Used to cascade the second IRQ controller |
|
| ( | E | ) | | None of the above |
The Correct Answer is: D
Explanation:
The IRQ numbers and relevant Standard Device
Assignment are given below. It is important to memorize these values before
going to the exam, as there would be 5-10 questions on IRQs, and conflicts.
| IRQ |
Standard device Assignment |
| 0 |
System Time |
| 1 |
Keyboard |
| 2 |
Cascade to IRQ9. Can't be used |
| 3 |
COM ports 2 and 4 |
| 4 |
COM ports 1 and 3 |
| 5 |
Parallel Port LPT2. Often used for sound cards |
| 6 |
Floppy drive controller |
| 7 |
Parallel
Port, LPT1 |
| 8 |
Real Time Clock |
| 9 |
Unassigned (Also redirected from IRQ2 |
| 10 |
Available |
| 11 |
Available - Usually for SCSI adapter |
| 12 |
Mouse or touch pads |
| 13 |
Math co-processor |
| 14 |
Primary hard-disk IDE controller |
| 15 |
Secondary hard-disk controller |
This quiz was generated by user cheche in july2002.
a+ certification || gmat test prep || pool game || funny joke
|
