|
COM 2 uses which of the following I/O addresses?
| ( | A | ) | | 2c6 |
 |
| ( | B | ) | | 3a7 |
 |
| ( | C | ) | | 3f8 |
 |
| ( | D | ) | | 4e2 |
 |
| ( | E | ) | | 2f8 |
The Correct Answer is: E
The most chosen answer was [ B ] :: [ 3a7 ]
Explanation:
COM 2 is assigned the the I/O address 2f8.
Of the following DMA Channels which is used by the Floppy Disk Controller?
| ( | A | ) | | DMA2 |
 |
| ( | B | ) | | DMA4 |
 |
| ( | C | ) | | DMA5 |
 |
| ( | D | ) | | DMA6 |
 |
| ( | E | ) | | DMA7 |
The Correct Answer is: A
Explanation:
The most common DMA (Direct Memory Access) Channels should be known. The Floppy Disk Controller / Floppy Drive uses channel 2, (DMA2).
The FDISK utility is used for what function?
| ( | A | ) | | Formats a 3.5" floppy disk |
 |
| ( | B | ) | | Defragments a disk drive |
 |
| ( | C | ) | | Copying large amounts of files |
 |
| ( | D | ) | | Formating logical partitions |
 |
| ( | E | ) | | Creating partitions on a physical disk |
The Correct Answer is: E
Explanation:
FDISK is used to create partitions on a hard disk drive.
What tool would be used to check for line voltage sags?
| ( | A | ) | | Surge protector |
 |
| ( | B | ) | | Feedback circuit |
 |
| ( | C | ) | | Terminal adapter |
 |
| ( | D | ) | | Polarity tester |
 |
| ( | E | ) | | High frequency monitor |
The Correct Answer is: D
Explanation:
A Polarity tester is useful whenever there is a need to check for the presence of low voltage in insulated conductors, without having to touch the live cable or wire.
What is the connector type that goes with a CGA / EGA monitor?
(this question provided by simulationexams.com)
| ( | A | ) | | DB-25 |
 |
| ( | B | ) | | DB-15 |
 |
| ( | C | ) | | DB-9 |
 |
| ( | D | ) | | DB-5 |
 |
| ( | E | ) | | None of the above |
The Correct Answer is: C
Explanation:
If you are using a Monochrome / CGA/ EGA monitor, it is a digital monitor and will have a DB-9 Male connector that plugs into a digital adapter. If you are using a VGA/ SVGA monitor, it will have a male DB-15 connector that plugs into an analog adapter. You should never interchange an analog monitor to that of a digital adapter and vice versa, or severe damage may take place.
This quiz was generated by user sajinvarghesechacko in july2002.
a+ certification || gmat test prep || pool game || funny joke
|