|
Which of the following printer technologies doesn't relate to the type of printer?
| ( | A | ) | | Laser |
 |
| ( | B | ) | | Dye Sublimation |
|
| ( | C | ) | | Split-Ink |
|
| ( | D | ) | | Thermal |
|
| ( | E | ) | | Dot Matrix |
The Correct Answer is: C
The most chosen answer was [ B ] :: [ Dye Sublimation ]
Explanation:
Split Ink technology is used to print security patterns across a document, usually with differing colors.
Laser, Dye Sublimation, Thermal & Dot Matrix all refer to types of printers.
How many pins a DIN-5 connector will have?
(this question provided by simulationexams.com)
| ( | A | ) | | 3 |
|
| ( | B | ) | | 4 |
|
| ( | C | ) | | 5 |
|
| ( | D | ) | | 9 |
|
| ( | E | ) | | None of the above |
The Correct Answer is: C
Explanation:
Usually, Keyboards come with two types of
connectors. They are:
1.
DIN-5
2.
Mini DIN-6
DIN-5 are used with AT style keyboards. DIN-5 has 5
pins. Mini DIN-6, also known as PS/2 connector has around port with 6 pins, one
of which being a square pin used for alignment.
At what point is it dangerous to be wearing a wrist band grounding strap?
| ( | A | ) | | While working close to an open monitor |
|
| ( | B | ) | | When removing a hard disk from a PC |
|
| ( | C | ) | | While installing additional RAM |
|
| ( | D | ) | | When using compressed air to clean the motherboard |
|
| ( | E | ) | | When replacing a bad Power Supply |
The Correct Answer is: A
Explanation:
It is very dangerous to be wearing a wrist band ground strap around an exposed monitor because the CRT (Cathode Ray Tube) will hold an incredible charge for a short time period after power has been disconnected.
On an Ethernet 10BaseT network what is the maximum data speed that can be carried through a CAT 5 cable?
| ( | A | ) | | 100 megabits/second |
|
| ( | B | ) | | 80 megabits/second |
|
| ( | C | ) | | 20 megabits/second |
|
| ( | D | ) | | 16 megabits/second |
|
| ( | E | ) | | 4 megabits/second |
The Correct Answer is: A
Explanation:
CAT 5 cable can carry data at a maximum speed of 100 megabits/second.
CAT 4: 20 megabits/second
CAT 3: 16 megabits/second
CAT 2: 4 megabits/second
CAT 1 wire is used with standard telephone lines inside a home.
How may devices can be added to a typical SCSI adapter?
| ( | A | ) | | 8 |
|
| ( | B | ) | | 7 |
|
| ( | C | ) | | 6 |
|
| ( | D | ) | | 5 |
|
| ( | E | ) | | Infinite |
The Correct Answer is: B
Explanation:
A typical SCSI adapter can support up to 7 devices. Including the adapter would be 8 devices, but since the question asks for how many can be 'added to,' then the adapter shouldn't be included in the calculation.
This quiz was generated by user MsBrickowskki in june2002.
a+ certification || gmat test prep || pool game || funny joke
|
