|
The SETUP program during the Boot process allows you to set which of the following?
| ( | A | ) | | Schedule system virus scan |
 |
| ( | B | ) | | Windows user accounts |
|
| ( | C | ) | | Network settings |
|
| ( | D | ) | | Details of the drives being used |
|
| ( | E | ) | | Screen resolution |
The Correct Answer is: D
The most chosen answer was [ B ] :: [ Windows user accounts ]
Explanation:
When entering the PCs main SETUP program during the Boot process you will have the option to manually set the details of the drives installed in the PC. All the other options can be set only after the OS has loaded.
IRQ2 is used with which of the following?
(this question provided by simulationexams.com)
| ( | A | ) | | COM1 |
|
| ( | B | ) | | COM2 |
|
| ( | C | ) | | LPT1 |
|
| ( | D | ) | | Used to cascade the second IRQ controller |
|
| ( | E | ) | | None of the above |
The Correct Answer is: D
Explanation:
The IRQ numbers and relevant Standard Device
Assignment are given below. It is important to memorize these values before
going to the exam, as there would be 5-10 questions on IRQs, and conflicts.
| IRQ |
Standard device Assignment |
| 0 |
System Time |
| 1 |
Keyboard |
| 2 |
Cascade to IRQ9. Can't be used |
| 3 |
COM ports 2 and 4 |
| 4 |
COM ports 1 and 3 |
| 5 |
Parallel Port LPT2. Often used for sound cards |
| 6 |
Floppy drive controller |
| 7 |
Parallel
Port, LPT1 |
| 8 |
Real Time Clock |
| 9 |
Unassigned (Also redirected from IRQ2 |
| 10 |
Available |
| 11 |
Available - Usually for SCSI adapter |
| 12 |
Mouse or touch pads |
| 13 |
Math co-processor |
| 14 |
Primary hard-disk IDE controller |
| 15 |
Secondary hard-disk controller |
While booting up, a client's computer shows an error message with a code 201. What is the likely cause?
(this question provided by simulationexams.com)
| ( | A | ) | | The CMOS battery is bad |
|
| ( | B | ) | | The CPU is bad |
|
| ( | C | ) | | The Hard disk is bad |
|
| ( | D | ) | | The Memory test has failed |
|
| ( | E | ) | | None of the above |
The Correct Answer is: D
Explanation:
The general errors and the corresponding failures
are shown below:
100-199 : System board failures
200-299 : Memory failures
300-399 : Key board failures
400-499 : Monochrome video problems
500-599 : Color video problems
600-699 : Floppy disk errors
1700-1799: Hard disk problems.
What does ISDN stand for:
| ( | A | ) | | Integrated Services Digital Network |
|
| ( | B | ) | | Internal Services Device Networked |
|
| ( | C | ) | | Input Send Destination Network |
|
| ( | D | ) | | Input System Digital Network |
|
| ( | E | ) | | Internet System Domain Network |
The Correct Answer is: A
Explanation:
ISDN, or Integrated Services Digital Network, is used as a high speed alternative to modems.
Which of the following files is NOT required for DOS to boot?
(this question provided by simulationexams.com)
| ( | A | ) | | COMMAND.COM |
|
| ( | B | ) | | MSDOS.SYS |
|
| ( | C | ) | | IO.SYS |
|
| ( | D | ) | | AUTOEXEC.BAT |
|
| ( | E | ) | | None of the above are required |
The Correct Answer is: D
Explanation:
The
file load order to start DOS is :
IO.SYS
MSDOS.SYS
CONFIG.SYS
COMMAND.COM
AUTOEXEC.BAT
Note
that CONFIG.SYS, and AUTOEXEC.BAT are optional to load DOS where as IO.SYS,
MSDOS.SYS, COMMAND.COM are required.
This quiz was generated by user george in june2002.
a+ certification || gmat test prep || pool game || funny joke
|
