|
Capacitors are measured in...
| ( | A | ) | | Ohms |
 |
| ( | B | ) | | Farads |
|
| ( | C | ) | | Volts |
|
| ( | D | ) | | Spindles |
|
| ( | E | ) | | Fusers |
The Correct Answer is: B
The most chosen answer was [ C ] :: [ Volts ]
Explanation:
The Farad is the basic unit of measurement for Capacitors.
What is the best way to improve the airflow in a system that uses a tower case?
| ( | A | ) | | Remove the case cover |
|
| ( | B | ) | | Install additional case fans |
|
| ( | C | ) | | Leave the CD ROM drive door open |
|
| ( | D | ) | | Lay the tower case on its side |
|
| ( | E | ) | | Use a can of compressed air |
The Correct Answer is: B
Explanation:
The most efficient way to improve the airflow in a tower case is to install additional case fans.
What is the connector type that goes with a CGA / EGA monitor?
(this question provided by simulationexams.com)
| ( | A | ) | | DB-25 |
|
| ( | B | ) | | DB-15 |
|
| ( | C | ) | | DB-9 |
|
| ( | D | ) | | DB-5 |
|
| ( | E | ) | | None of the above |
The Correct Answer is: C
Explanation:
If you are using a Monochrome / CGA/ EGA monitor, it is a digital monitor and will have a DB-9 Male connector that plugs into a digital adapter. If you are using a VGA/ SVGA monitor, it will have a male DB-15 connector that plugs into an analog adapter. You should never interchange an analog monitor to that of a digital adapter and vice versa, or severe damage may take place.
What is the storage capacity of a 3 1/2" Double Sided High Density (DSHD) Floppy disk?
(this question provided by simulationexams.com)
| ( | A | ) | | 1.2 MB |
|
| ( | B | ) | | 1.44 MB |
|
| ( | C | ) | | 720 KB |
|
| ( | D | ) | | 1.4 MB |
|
| ( | E | ) | | None of the above |
The Correct Answer is: B
Explanation:
The storage capacity of various types of floppy disks that you need to know as part of A+ certification is given below:
Size------Type----Storage
5 1/4" ---DSDD----360KB
5 1/4" ---DSHD----1.2MB
3 1/2" ---DSDD----720KB
3 1/2" ---DSHD----1.44MB
3 1/2" ---DSED----2.88MB
DSDD: Double Sided Double Density
DSHD: Double Sided High Density
DSED: Double Sided Extra Density
Your customer has bought a second hard disk and added it an existing computer. The first hard disk is having one primary partition and one Extended partition. The extended partition is divided into two logical drives D and E. When you install the second hard drive and format it, what would be the drive letter assigned to the first logical drive on the extended partition of first hard disk? Assume that the second hard disk has one primary partition and only one logical drive on the Extended partition.
(this question provided by simulationexams.com)
| ( | A | ) | | "D" |
|
| ( | B | ) | | "E" |
|
| ( | C | ) | | "F" |
|
| ( | D | ) | | "G" |
|
| ( | E | ) | | None of the above |
The Correct Answer is: B
Explanation:
The
revised drive assignment looks as follows:
Drive
1: C (Primary Partition), E (First logical Drive), F (Second logical Drive)
Drive
2: D (Primary Partition), G( for
Logical drive on Extended Partition)
In
addition, please note the following:
DOS,
Windows3.1 Windows 95/ 98 operating systems share the following criteria:
1.
Each can have only one primary partition per hard disk
2.
The primary partition is automatically assigned a drive letter
3.
Each hard disk can have only one Extended partition
4.
You can create one or more logical drives in the Extended partition.
5.
The drive letters are assigned manually to logical drives.
This quiz was generated by user Mengesha Shiferaw in march2002.
a+ certification || gmat test prep || pool game || funny joke
|
