|
There are many different connector types that are used on network cables. Which of the following is a common Network Cable Connector?
| ( | A | ) | | BNC |
 |
| ( | B | ) | | RJ-45 |
|
| ( | C | ) | | AUI |
|
| ( | D | ) | | ST / SC |
|
| ( | E | ) | | All of the above are connectors |
The Correct Answer is: E
The most chosen answer was [ A ] :: [ BNC ]
Explanation:
They are all common network cable connectors.
BNC: used with coaxial cables
RJ-45: used with 8-wire network cables, most commonly found with Ethernets.
AUI: used with coaxial cables
ST / SC: used with fiber optic cables
Which control signal on a serial cable, indicates that the data set is ready?
(this question provided by simulationexams.com)
| ( | A | ) | | DTR |
|
| ( | B | ) | | DSR |
|
| ( | C | ) | | RTS |
|
| ( | D | ) | | CTS |
|
| ( | E | ) | | None of the above |
The Correct Answer is: B
Explanation:
COM1, COM2 on a computer uses a serial cable. The pin
assignments are shown below. The computer acts as a DTE (Data Terminal Equipment)
and the Modem acts as DCE (Data Communication Equipment).
Signal--Name---------DB9 Pin
RX------Received Data--2
TX------Transmitted Data-3
DTR-----Data Terminal Ready--4
GND---- Ground--5
DSR---- Data Set Ready--6
RTS---- Request to Send--7
CTS---- Clear to send--8
Normally, a DTE device connects to a DCE device
with a straight cable. If you want to connect two DTR devices, as you would do
to hook up two computers via the serial line to exchange files, the cable itself
must have cross connections. Such a cable is called a null modem cable.
What is the file extension on a permanent swap file in Windows 98?
| ( | A | ) | | PSW |
|
| ( | B | ) | | SWAP |
|
| ( | C | ) | | SWP |
|
| ( | D | ) | | PERM |
|
| ( | E | ) | | PAR |
The Correct Answer is: C
Explanation:
The permanent swap file in Windows 3.1 and some later versions is called 386SPART.PAR and it typically has a system attribute which makes it invisible to standard DOS or Windows programs. The file usually can be found in the root directory of the drive designated in the Virtual Memory dialog box. Another place to look is in the Windows subdirectory or the Windows\System subdirectory.
The permanent swap file in Windows 95 and Windows 98 is called WIN386.SWP
Which of the following still holds a charge even after the power to the system has been disconnected?
| ( | A | ) | | Capacitor |
|
| ( | B | ) | | Fuse |
|
| ( | C | ) | | SIMM chip |
|
| ( | D | ) | | CMOS |
|
| ( | E | ) | | CPU |
The Correct Answer is: A
Explanation:
The Capacitor will keep a charge for an amount of time even after all power has been disconnected. A Capacitor holds a charge in the form of an electrostatic field.
Which of the following methods in Windows NT 4.0 can be used to check to see how much free space is left on the C:\ drive?
| ( | A | ) | | Open My Computer, Right Click on C:\, Left Click on Properties |
|
| ( | B | ) | | Open NT Explorer, Select C:\ in the left frame, and details should be on the bottom of the window |
|
| ( | C | ) | | In Control Panel, Double Click C:\ |
|
| ( | D | ) | | Right Click on System in Control Panel, Left Click on Properties |
|
| ( | E | ) | | Either A or B would work |
The Correct Answer is: E
Explanation:
Two quick methods for finding out how much free space is left on the C:\ is by going through My Computer or NT Explorer.
This quiz was generated by user guest130210 in march2002.
a+ certification || gmat test prep || pool game || funny joke
|
